Finding your suitable pressure assist toilets gerber is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pressure assist toilets gerber including detail information and customer reviews. Let’s find out which is your favorite one.
Best pressure assist toilets gerber
1. Flushmate M-101526-F31 FM III 503 Pressure Assist tank less Handle for most OEM 2 piece toilets using Flushmate
FeatureFor ALL OEMs except Kohler K 4404 tank and Gerber 28-385 tank ; CAUTION does NOT work in One-piece Fixtures ; Tank-to-Bowl Gasket
It does NOT fit 10 Inch rough-in tanks, only 12 Inch rough-in tanks. "Rough-in" refers to the distance from the wall to the bolts at the center of the drain.
ONLY used on model 503 Flushmate Systems 1.6 gpf tanks
Does not include Cartridge
DescriptionWork Instruction: Replacement Instructions for Two Piece Flushmate Tanks
Products: Two Piece Toilet Applications (M-101XXX Models, Series: 501A, 501B, 503)
Turn off water at the supply stop. Flush the toilet to relieve water and air pressure from the Flushmate system. Disconnect water supply line from the supply shank and remove the lock nut that holds the supply shank in place. The supply shank protrudes from the bottom of the china tank on the left hand side.
If necessary, disconnect the Flushrod from the flush-handle linkage. Remove the screws that attach the Flushrod to the Flushmate and use them to attach the Flushrod to the new Flushmate.
Loosen the nuts on the bolts protruding from the underside of the toilet, below the china tank. These nuts should be loosened much like lug nuts on an automobile wheel; alternate between them instead of completely removing one at a time.
Once the nuts have been removed, lift the china tank straight up off of the bowl. Empty any residual water that may have accumulated in the china tank into the china bowl. Place the china tank down flat on its backside on a security location.
Remove the tank to bowl gasket (thick, spongy doughnut-type) from the Discharge Extension and unscrew large lock-nut on the bottom center of the china tank. A spanner wrench works well for this, but any tool that will spread to accommodate the 3 plastic locknut will work.
Slide the Flushmate system out of the china tank.
Place new tank to tank gasket (flat rubber gasket with ribs on one side) on new Flushmate with the ribs facing downward. Some tank to tank gaskets do not have ribs, installation of this gasket is universal. Slide the Flushmate system into the china tank. It's best to insert the supply shank into the china tank first and than the Flushmate vessel.
Screw both lock-nuts onto the exposed threads (supply shank and discharge extension) on the bottom end of the china tank.
Place the tank to bowl gasket onto the exposed discharge extension and reattach tank to bowl.
Attach brass washers and hex nuts to each bolt (making sure you put the washers on before the hex nuts) and tighten securely. When tightening the tank to bowl nuts, use the alternating method while putting downward pressure on each side as you tighten the nuts on that side. In effect, you will be rocking the system in the direction of the nuts you are tightening. You must get the bolts tight enough to prevent any leakage (when flushed) between the tank and the bowl, but not so tight that you risk breaking the china.
Reattach water supply line to the supply shank and turn on the supply stop. Wait for Flushmate to set up (fill with water and stop cycling ) and flush the toilet. If the Flushmate doesn't set up and water continues to run through it, you will need to adjust the cartridge and perhaps the actuator cap. See the owners manual for adjustment
2. GERBER Toilet Tank, Pressure Assist Tank 1.6 gpf, Left Hand
DescriptionToilet Tank, Pressure Assist, Floor Mounting Style, 1.6 Gallons per Flush, Rough-In (In.) 4.25, Vitreous China Material of Construction, White Color/Finish, Height (In.) 13.5, Width (In.) 20.25, Depth (In.) 8.75, Standards ASME Standard A 112.19.2., Manufacturers Warranty Length Limited Lifetime
3. Cartridge Removal Wrench for Sloan ST100500 Flushmate Pressure Assist Toilet
FeatureMake installation fast and easy
Made with heavy-duty materials
Eliminates broken cartridges
Removes and adjusts Sloan Flushmate Cartridge C-100500-K and Gerber Cartridge 99-403
Made in the USA
DescriptionThis FlushLine cartridge wrench is designed to remove cartridges Socket type wrench installs for Sloan Flushmate ST100500. This wrench removes and adjusts the cartridges for all Flushmate systems. Made in the USA this wrench eliminates broken cartridges and makes installation fast and easy. The FlushLine cartridge wrench is made with heavy-duty genuine poly-pig steel.
4. Gerber 21-312 Ultra Flush Elongated Two Piece Pressure Assist Toilet - White
FeatureDual Flush 1.1/1.6 gpf (4/6 Lpf) gravity-fed toilet
Generous water surface ensures a clean bowl with every powerful flush!
Uses 20% less water than standard 1.6 gpf toilets
Top-activated, two button actuator allows easy selection of appropriate flush volume
DescriptionDual Flush 1.1/1.6 gpf (4/6 Lpf) gravity-fed toilet Uses 20% less water than standard 1.6 gpf toilets Generous water surface ensures a clean bowl with every powerful flush! Top-activated, two button actuator allows easy selection of appropriate flush volume
5. Gerber Plumbing 21-372 Gerber Ultra Flush Watersense Elongated Toilet Bowl Only, White
FeatureGerber ultra flush watersense elongated toilet bowl, white, 1.6 gph - 21372
This is highly durable
This is manufactured in china
Bowl Only (Toilet seat and tank not included)
DescriptionTank has 1. 6 GPF - 12'' rough-in Reverse trap - Complete with pressure assist unit, bolt caps, flush lever and tank-to-bowl assembly kit - 2'' trapway #449405 model meets ADA height requirements Meets ANSI/ASME and CSE requirements (Toilet seat not included) Watersense high efficiency toilet
6. Gerber Ultra Flush Watersense High-Efficiency Toilet Tank, White, 1.1 Gpf
FeaturePlumbing/Toilet, Urinals & Parts
Manufacturer: Gerber Plumbing
Made in: China
Description1.1 Goff/4.0 Luff Pressure Assist Toilet Meets All Anise and CA Requirements For Het Uses 40% Less Water Than Low Consumption Toilets Left Handed Trip Lever Water sense high efficiency toilet
7. Toilet Bowl, Pressure Assist, Floor, White
FeaturePrice For: Each Material: Vitreous China Color: White Item: Toilet Bowl Mounting Style: Floor Water Surface Area: 12" x 10" Gallons per Flush: 1.10/1.60 Rim Height: 17" Standards: ASME Standard A 112.19.2. Manufacturers Warranty Length: Limited Lifetime Bowl Shape: Elongated Bowl Height: 17" Bowl Width: 14-3/4" Collection: Ultra Flush(R) Ergoheight(TM)
For Use With Tank Type: Pressure Assist Tank Bowl Depth: 28-3/4" Country of Origin (subject to change): China
Description' Toilet Bowl, Mounting Style Floor, Bowl Shape Elongated, Gallons per Flush 1.10/1.60, Water Surface Area 12 In. x 10 In., Bowl Height 17 In., Bowl Width 14-3/4 In., Bowl Depth 28-3/4 In., For Use With Tank Type Pressure Assist Tank, Collection Ultra Flush(R) Ergoheight(TM), Rim Height 17 In., Material Vitreous China, Color White, Standards ASME Standard A 112.19.2., Manufacturers Warranty Length Limited Lifetime '
8. 1 Pc, Gerber Ultra Flush 1.1 Gpf Toilet Tank Pressure Assist Right Hand Lever E W/Gerber Ultra Flush Toilet Bowl Only
FeatureGerber Ultra Flush Pressure-Assist Toilet, 1.1 GPF, Extra Large Water Surface And Unique Trapway Design Deliver Exceptional Drain Line Carry, Toilet Tank, Bowl Sold Separately, Powered By WDI, Right Hand Tank Lever, 12" Rough-In.
Uses 31% Less Water Than Standard 1.6 GPF Toilet, Limited Lifetime Warranty, Use With Gerber Ultra Flush Toilet Bowl Only (404802 Elongated, 404803 Elongated ADA, 404808 Back-Outlet Elongated, 404809 Back-Outlet Elongated ADA).
Country of Origin: CHINA; Gallons Per Flush (Gal): 1.1; Made in the USA: No;
FOB: No; JWOD: No; Flow Control: 1.1; TAA/BAA: No; UPC Code: 671052046522;
Description1 Pc, Gerber Ultra Flush 1.1 Gpf Toilet Tank Pressure Assist Right Hand Lever E W/Gerber Ultra Flush Toilet Bowl Only
9. Gerber 21-317 Ultra Flush ADA Elongated Two Piece Pressure Assist Toilet with 10" Rough - White
FeatureGerber 21-317 Ultra Flush ADA Elongated Two Piece Pressure Assist Toilet with 10" Rough - White
DescriptionGerber 21-317 Ultra Flush ADA Elongated Two Piece Pressure Assist Toilet with 10" Rough - White
10. Polypropylene Pressure Assist System, Black, For Use With All OEM Toilets Except Kohler K4404 Tank a
FeatureItem-Pressure Assist System
Sub-Category-Flappers Valves and Sensors
For Use With-All OEM Toilets Except Kohler K4404 Tank and Gerber 28-385 Tank
Pressurized flush eliminates double flushing and clogs and saves water. Fewer moving parts, which extends service life. Includes tank-to-bowl gasket. Flush cartridge, upper supply, and lower supply are replacement parts for all Flushmate systems.